1. Compact sized control box with precise small & strong micro
motor handpiece
2. Very High-powered and quality 0-35,000rpm Made in Korea by
SAEYANG
3. Tool exchange method using cam (twist the handle counter-clock
wise to change the bur and can be easily restored back to the
original position)
4. Non stage speed system (it's well designed to output from zero
to 45,000rpm by using non stage speed system)
5. Right & Left turning ability for the dental N8 micro motor
6. Foot ON/OFF switch system (Variable Control system using foot )
7. Automatic stop turns on red light with alarming beep sound
8. Easy change of the driving direction for efficiency
9. No heat after long hours of operation by effective electrical
design
10. SKU: SY-D-S03(E)-110
Specification:
Model: M-4
Tips size: 2.35mm
Speed: 0~45,000 rpm, less-vibration standar
carbon brush motor
Weight:3.45KG
Design: Compact & Ergonomic
Straight and contra angle handpieces
This Latch type contra angle low speed handpiece has better quality
in its crafts, raw materials, its bearings and turbines are
imported from Switzerland.
Intended for dental clinical treatment and prevention.
Suitable for any E-type headpiece accords with ISO standard
Suitable for both steam and chemical autoclave
E type low speed handpiece 1:1 Ratio, with externel cooling system
AIR PRESSURE: 245~392Kpa (2.5~4.0 kgf/cm2)
WATER PRESSURE: 198Kpa (2 kg)
ROTATION SPEED: 22,000~27,000 rpm
CHUCK TYPE: Latch type
BUR APPLICABLE: Φ2.334~2.355 mm
NOISE: ≤70dB
Content:
1 x Power Control Unit N8
1 x On/Off Switch Foot Pedal
1 x Handpiece base
1 x dental low speed straight handpiece
1 x dental low speed contra angle handpiece
1 x dental low speed air motor
